Aquataps offers

Installation Service

Aquataps have over 20 years experience in the filtered water industry so you are certainly in safe hands. Whether or not you are installing the Aquatap yourself or are using our installation service, we have a team of trained technicians who can help.

If you decide to install the tap yourself you will be pleasantly surprised on how easy it is. We have an instructional video showing you all the steps of how to install your Aquatap and if you have any further questions we have a dedicated team of technicians who can answer any questions you may have.

If you live in our installation area (please check the postcodes below) Aquataps are able to offer this service. Our fully Accredited installers are on hand to make the install a simple and quick process

Enter your postcode to find out if an AQUATAPS Accredited Installer covers your area.

Loc
Installation Service Product 2

INSTALLATION SERVICE FOR:

Aquatap Prime 3 in 1 Taps

Aquatap Classic 4 in 1 Taps

Aquatap Ultra 4 in 1 Taps with Pull Out Shower

£199.00 Inc. VatAdd to basket

INSTALLATION SERVICE FOR:

Aquatap Fizz 5 in 1 Taps

£275.00 Inc. VatAdd to basket

PRE INSTALLATION – CHECK LIST

Whether or not Aquataps are doing your installation or you are installing the Aquatap yourself please see the basic requirements you will need in order to install the  Aquatap.
Connection To A Mains Water Supply

Connection to a mains water supply

Connection to a mains water supply, with both the hot and the cold water having a pressure between 1.5 Bar and 5 Bar. If the water pressure exceeds 5 bar a pressure reducing valve must also be used.

3 Pin 13 Amp Plug Socket

3 pin 13 Amp plug socket

  • A standard 3 pin 13 Amp plug socket is needed in the cupboard near your boiler.
  • You will need an extra 13 amp socket for the chiller option (5 in 1 Taps).
Water Supply Shut Off Valve

Water supply shut off valve

The ability to shut of your water supply with knowledge of where your stop cock is.

Sink Waste Pipe

Sink waste pipe

An under sink waste pipe already in place.

Room Under The Sink.

Room under the sink.

Enough room for your boiler under your sink:

  • 2.4 litres boiler (300mm High, 190mm Wide & 190 mm Deep)
  • 4 litres boiler (300mm High, 190mm Wide & 300mm Deep)
  • If you are choosing a chiller check you have enough room (420mm High, 250mm Wide & 400mm Deep) If a chiller is being used good ventilation will also be required and your cupboard may require a ventilation grill.
A 35Mm Hole For The Tap And Space Behind The Tap.

A 35mm hole for the tap and space behind the tap.

Generally a 35mm hole will be required for the tap but this may vary depending on the model. Please check the model specification for exact dimensions.

DO IT YOURSELF

DIY INSTALLATION VIDEOS

If you’re a happy to Do IT Y-self and comfortable with simple plumbing, why not consider a self-install?

Please watch our step by step installation video guide.

It will make your Tap Installation process as smooth as possible.

Installation Guide – Aquatap Classic – Video Thumbnail Website
Installation Guide – Aquatap Ultra – Pull Out Spray – Video Thumbnail 1