Installation Service for Aquataps 5 in 1 Taps

Aquataps installation service is available in some parts of the UK.

Please find out if a AQUATAPS Accredited Installer covers your area.

Installation Checklist:

• Connection to a hot and cold water supply with a water pressure of between 1.5 Bar and 5 Bar for a Aquataps
• Connection to a cold water supply with a water pressure of between 1.5 Bar and 5 Bar for a Aquataps
• Access to a standard 13A plug socket (2 sockets if you are also installing a Chiller).
• The ability to shut off the water.
• An under sink waste pipe already in place.
• A 35mm hole for the tap and space behind the tap.
• When installing a Aquataps Boiler, the minimum size of you’re kitchen cabinet needs to be 400mm.
• If you are installing a Aquataps Boiler and a Aquataps Chiller, the minimum size of you’re kitchen cabinet needs to be 600mm.
• Room for your boiler under the sink.

Please note:

• Installation Service: This service is available exclusively for Aquataps brand boiling water taps. Installation of other brands is not included.

• Important Requirements: If the specified installation conditions are not met, the installer may need to make a return visit, which could result in additional charges. Please ensure that Aquataps boiler tanks and chillers have a minimum of 80 mm clearance above them to allow proper fitting of hoses.

Please check more about PRE INSTALLATION – CHECK LIST