Installation Service for 5 in 1 Taps

Aquataps installation service is available in some parts of the UK.

Please find out if a AQUATAPS Accredited Installer covers your area.

• Connection to a hot and cold water supply with a water pressure of between 1.5 Bar and 5 Bar for a Aquataps
• Connection to a cold water supply with a water pressure of between 1.5 Bar and 5 Bar for a Aquataps
• Access to a standard 13A plug socket (2 sockets if you are also installing a Chiller).
• The ability to shut off the water.
• An under sink waste pipe already in place.
• A 35mm hole for the tap and space behind the tap.
• When installing a Aquataps Boiler, the minimum size of you’re kitchen cabinet needs to be 400mm.
• If you are installing a Aquataps Boiler and a Aquataps Chiller, the minimum size of you’re kitchen cabinet needs to be 600mm.
• Room for your boiler under the sink.

Please Note: If these conditions are not met, installers may require a return visit which will result in additional charges. Aquataps Boiler tanks and Chillers require 80mm clearance above them for the hoses.

Please check more about PRE INSTALLATION – CHECK LIST