Aquatap Pro | Polished Chrome | 4 in 1 Instant Boiling Water Tap | C Shape

Tap Specification:

• Mounting: Deck or sink mount (35mm hole required)
• Tap Clearance: Minimum distance from the center of the tap hole to the wall is 80 mm
• Material: Quality brass with a Matt Black finish for long life
• Spout Insulation: Keeps the spout cool to touch while dispensing boiling water
• Cartridges: Quarter turn ceramic cartridges for ease of use and long service life
• Spout Features: 180-degree swivel spout with aerator fitting for maximum flexibility and good water flow
• Levers:
  • Right-hand side Hot/Cold water lever – easy to use single lever
  • Left-hand side safety sprung lock handle for child safety and additional safety feature
• Additional Features: Opposite twist for cold filtered water
• Water Pressure Requirements: Minimum 1.5 bar, maximum 5.0 bar
• Installation: Flexible connecting hoses and tap fixing kit included
• Guarantee: 5 years
• Design: C-Shape Neck

Tap Dimensions:

• Height: 397.3mm
• Reach: 200mm
• Spout Width: 28mm
• Spout Height: 226.6mm
• Tap Hole: 35mm

————————————

4 Litre Boiler Specification:

• Display: Front view digital touch screen – easy to read and use
• Installation: Simple and quick, normally takes no more than one hour depending on existing plumbing
• Capacity: 4 litres (delivers enough for 14-16 of tea or coffee at a time)
• Water Pressure Requirements: Minimum 1.5 bar, maximum 5.0 bar
• Temperature Range: Pre-set 55°C to 98°C with thermostat accuracy to plus/minus 0.5°C
• Heat Up Time: Approximately 12 minutes for cold water
• Materials:
  • Outer Casing: Powder coated mild steel
  • Inner Tank: Stainless steel
• Insulation: Latest technology for maximum energy efficiency
• Guarantee: Tank has a 2 year guarantee

Boiler Dimensions:

• Height – 272mm
• Width – 200mm
• Depth – 289mm

Boiler Electrical Data:

• Power Supply: Standard 13 amp detachable cable
• Voltage: 220-240 volt
• Power Rating: 1.5kw

————————————

Double In-Line Filter Specification:

• Function: Filters water, protects tank from limescale build up, and improves boiling water taste
• Filters:
  • Filter 1: Nano phosphate filter to prevent limescale in the tank
  • Filter 2: Removes bacteria, chlorine, and other particles
• Installation: Fits neatly under the sink with easy installation
• Replacement Cycle: Estimated every 6 months
• Filter Housing Dimensions:
  • Height: 295mm
  • Width: 196mm

What do our filters remove?

• Chlorine: 99.5%
• Trichloromethane: 95.78%
• Lead: 98.4-99.2%
• Arsenic: 97.8%-86.7%
• Iron: 99.5%
• Manganese: 98.7%

*Free Delivery is offered to UK Mainland destinations only. We will add a delivery charge to below destinations:

• Scottish Islands
• Scottish Highlands
• Northern Ireland
• Isle of Man, Jersey and Guernsey

————————————

Chiller Specification

• Cold Water Tank: Stainless Steel, 1.95 Litres
• Cooling Performance: 11.5 Litres per hour below 10˚C at influent water temperature
  of 20˚C
• Thermostat: 4˚C to 10˚C Factory set (Do not adjust)
• Refrigeration System: R-600a, 16g
• Power Supply: 220-240Volt, 50/60 Hz
• Inlet and Outlet Pipes: ¼” Push Fit
• Ventilation: allow for 50 mm clearance on all sides
• Please note that all chillers need adequate ventilation to work efficiently. Without proper ventilation, performance will be adversely affected, potentially leading to premature failure. Aquataps provides grids free of charge for kitchen doors to ensure correct ventilation. If the chiller fails due to insufficient ventilation, it will not be covered by your Aquataps warranty.

Chiller Dimensions:

• Height – 300mm
• Width – 410mm
• Depth – 300mm

Weight – 12.5kg